Question # 1 A company is using HPE Aruba Networking Central SD-WAN Orchestrator to establish a hub-spoke VPN between branch gateways (BGWs) at 1444 site and VPNCs at multiple data centers.
What is part of the configuration that admins need to complete?
A. At the global level, create default IPsec policies for the SD-WAN Orchestrator to use.B. In BGWs' groups, select the VPNCs to which to connect in a DC preference list.C. In VPNCs' groups, establish VPN pools to control which branches connect to which
VPNCs.D. In BGWs' and VPNCs' groups, create default IKE policies for the SD-WAN Orchestrator
to use.
Click for Answer
B. In BGWs' groups, select the VPNCs to which to connect in a DC preference list.
Answer Description When using HPE Aruba Networking Central SD-WAN Orchestrator to establish a hub-spoke VPN between branch gateways (BGWs) and VPN concentrators (VPNCs) at multiple data centers, admins need to configure the BGWs' groups by selecting the VPNCs to which they should connectin a Data Center (DC) preference list. This configuration ensures that branch gateways are properly directed to the preferred VPN concentrators, optimizing the hub-spoke VPN topology.
1.DC Preference List: This list allows administrators to prioritize which data center VPNCs
the BGWs should connect to, ensuring efficient routing and redundancy.
2.Hub-Spoke Configuration: Properly setting the DC preference list is essential for
establishing the desired hub-spoke VPN architecture.
3.Optimized Connectivity: This setup helps in optimizing traffic flow and maintaining
connectivity between branches and data centers.
Reference:
SD-WAN Orchestrator configuration guides provide detailed steps for setting up
hub-spoke VPN topologies and configuring DC preference lists for BGWs.
Question # 2 A company needs to enforce 802.1X authentication for its Windows domain computers to HPE Aruba Networking ClearPass Policy Manager (CPPM). The
company needs the computers to authenticate as both machines and users in the same session.
Which authentication method should you set up on CPPM? A. TEAPB. PEAP MSCHAPv2C. EAP-TTLSD. EAP-TLS
Click for Answer
A. TEAP
Answer Description Explanation:
To enforce 802.1X authentication for Windows domain computers to HPE Aruba Networking ClearPass Policy Manager (CPPM) and have the computers authenticate as both machines and users in the same session, you should set up TEAP (Tunneled EAP) as the authentication method. TEAP supports both machine and user authentication within a single 802.1X session, making it suitable for scenarios where both types of authentication are required simultaneously.
[Reference: Aruba ClearPass configuration guides provide detailed instructions on setting up TEAP for environments requiring combined machine and user authentication., , , , ]
Question # 3 You are deploying a virtual Data Collector for use with HPE Aruba Networking ClearPass Device Insight (CPDI). You have identified VLAN 101 in the data center
as the VLAN to which the Data Collector should connect to receive its IP address and connect to HPE Aruba Networking Central.
Which Data Collector virtual ports should you tell the virtual admins to connect to VLAN 101? A. The one with the lowest MAC addressB. The one with the highest port IDC. The one with the highest MAC addressD. The one with the lowest port ID
Click for Answer
D. The one with the lowest port ID
Answer Description Explanation:
When deploying a virtual Data Collector for HPE Aruba Networking ClearPass Device Insight (CPDI), it is essential to ensure that the correct virtual port is connected to the designated VLAN. In this case, VLAN 101 is used to receive the IP address and connect to Aruba Central. The best practice is to use the virtual port with the lowest port ID. This is typically the primary port used for management and network connectivity in virtual environments, ensuring proper network integration and communication.
[Reference: Aruba's ClearPass Device Insight deployment guides and virtual appliance setup documentation provide detailed instructions on configuring network interfaces and VLAN assignments., , , , , ]
Question # 4 You have installed an HPE Aruba Networking Network Analytic Engine (NAE) script on an AOS-CX switch to monitor a particular function.
Which additional step must you complete to start the monitoring? A. Reboot the switch.B. Enable NAE, which is disabled by default.C. Edit the script to define monitor parameters.D. Create an agent from the script.
Click for Answer
D. Create an agent from the script.
Answer Description Explanation:
After installing an HPE Aruba Networking Network Analytic Engine (NAE) script on an AOS-CX switch, the additional step required to start the monitoring is to create an agent from the script. The agent is responsible for executing the script and collecting the monitoring data as defined by the script parameters.
1.Script Installation: Installing the script provides the logic and parameters for monitoring.
2.Agent Creation: Creating an agent from the script activates the monitoring process, allowing the NAE to begin tracking the specified function.
3.Operational Step: This step ensures that the monitoring logic is applied and the data collection starts as per the script’s configuration.
[Reference: Aruba AOS-CX documentation and Network Analytics Engine guides outline the process of script installation and the necessity of creating an agent to activate monitoring., , ]
Question # 5 An admin has configured an AOS-CX switch with these settings:
port-access role employees
vlan access name employees
This switch is also configured with CPPM as its RADIUS server.
Which enforcement profile should you configure on CPPM to work with this configuration? A. RADIUS Enforcement type with HPE-User-Role VSA set to "employees"B. HPE Aruba Networking Downloadable Role Enforcement type with role name set to "employees"C. HPE Aruba Networking Downloadable Role Enforcement type with gateway role name set to "employees"D. RADIUS Enforcement type with Aruba-User-Role VSA set to "employees"
Click for Answer
D. RADIUS Enforcement type with Aruba-User-Role VSA set to "employees"
Answer Description Explanation:
To ensure that the AOS-CX switch properly assigns the "employees" role when using CPPM (ClearPass Policy Manager) as the RADIUS server, you should configure a RADIUS Enforcement profile on CPPM with the Aruba-User-Role VSA (Vendor-Specific Attribute) set to "employees". This configuration ensures that when an endpoint authenticates, CPPM sends the appropriate role assignment to the AOS-CX switch, which then applies the corresponding policies and VLAN settings defined for the "employees" role.
[Reference: Aruba's ClearPass documentation and AOS-CX configuration guides detail the integration and configuration of RADIUS enforcement profiles using Aruba-User-Role VSAs for role-based access control., , , ]
Question # 6 You have configured an AOS-CX switch to implement 802.1X on edge ports. Assume ports operate in the default auth-mode. VolP phones are assigned to the
"voice" role and need to send traffic that is tagged for VLAN 12.
Where should you configure VLAN 12? A. As the trunk native VLAN on edge ports and the trunk native VLAN on the "voice" roleB. As a trunk allowed VLAN on edge ports and the trunk native VLAN in the "voice" roleC. As the trunk native VLAN in the "voice" role (and not in the edge port settings)D. As the allowed trunk VLAN in the "voice" role (and not in the edge port settings)
Click for Answer
D. As the allowed trunk VLAN in the "voice" role (and not in the edge port settings)
Answer Description Explanation:
When configuring 802.1X authentication on edge ports of an AOS-CX switch and assigning VoIP phones to a "voice" role, the correct approach is to configure VLAN 12 as the allowed trunk VLAN in the "voice" role. This setup ensures that traffic tagged for VLAN 12 is appropriately managed by the role applied to the VoIP phones. In AOS-CX switches, the role-based VLAN configuration allows for more granular control and ensures that the VoIP phones' traffic is handled correctly without altering the edge port settings, which typically operate with default settings for authentication.
[Reference: Detailed configuration and role assignment practices for AOS-CX switches can be found in Aruba's configuration guides and documentation related to AOS-CX switch deployments., , , , , ]
Question # 7 You are setting up an HPE Aruba Networking VIA solution for a company. You have already created a VPN pool with IP addresses for the remote clients. During
tests, however, the clients do not receive IP addresses from that pool.
What is one setting to check? A. That the pool uses valid, public IP addresses that are assigned to the companyB. That the pool is associated with the role to which the VIA clients are being assignedC. That the pool uses an IP subnet that is different from any subnet configured on the VPNCD. That the pool is referenced in the clients' VIA Connection Profile
Click for Answer
B. That the pool is associated with the role to which the VIA clients are being assigned
Answer Description Explanation:
If VIA clients are not receiving IP addresses from the configured VPN pool, one setting to check is whether the pool is associated with the role to which the VIA clients are being assigned. The association between the IP pool and the role ensures that clients assigned to that role receive IP addresses from the correct pool.
1.Role Association: Each role can be associated with a specific IP pool, ensuring that clients assigned to the role receive addresses from the intended pool.
2.IP Allocation: Proper configuration of the IP pool and its association with the role is crucial for correct IP address allocation.
3.VIA Configuration: Ensuring that all settings, including IP pool associations, are correctly configured, facilitates seamless client connectivity.
[Reference: Aruba's VIA configuration guides provide detailed steps for setting up VPN pools and associating them with client roles to ensure correct IP address allocation., , ]
Question # 8 You have run an Active Endpoint Security Report on HPE Aruba Networking ClearPass. The report indicates that hundreds of endpoints have MAC addresses but no known IP addresses.
What is one step for addressing this issue? A. Set up network devices to implement RADIUS accounting to CPPM.
B. Add CPPM's IP address to the IP helper list on routing switches.C. Set up switches to implement ARP inspection on client VLANs.D. Configure CPPM as a Syslog destination on network devices.
Click for Answer
B. Add CPPM's IP address to the IP helper list on routing switches.
Answer Description When the Active Endpoint Security Report on HPE Aruba Networking ClearPass indicates that endpoints have MAC addresses but no known IP addresses, one effective step to address this issue is to add CPPM's (ClearPass Policy Manager) IP address to the IP helper list on routing switches. This configuration ensures that DHCP requests are forwarded to the ClearPass server, allowing it to track and report the IP addresses assigned to the endpoints. This helps ClearPass maintain an accurate mapping of MAC addresses to IP addresses, improving endpoint visibility and security management.
Reference:
ClearPass configuration guides and best practices documentation outline the
importance of integrating ClearPass with network infrastructure using IP helper addresses
to ensure comprehensive endpoint visibility and management.
Up-to-Date
We always provide up-to-date HPE7-A02 exam dumps to our clients. Keep checking website for updates and download.
Excellence
Quality and excellence of our Aruba Certified Network Security Professional Exam practice questions are above customers expectations. Contact live chat to know more.
Success
Your SUCCESS is assured with the HPE7-A02 exam questions of passin1day.com. Just Buy, Prepare and PASS!
Quality
All our braindumps are verified with their correct answers. Download ACNSP Practice tests in a printable PDF format.
Basic
$80
Any 3 Exams of Your Choice
3 Exams PDF + Online Test Engine
Buy Now
Premium
$100
Any 4 Exams of Your Choice
4 Exams PDF + Online Test Engine
Buy Now
Gold
$125
Any 5 Exams of Your Choice
5 Exams PDF + Online Test Engine
Buy Now
Passin1Day has a big success story in last 12 years with a long list of satisfied customers.
We are UK based company, selling HPE7-A02 practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.
We dont have a single unsatisfied HP customer in this time. Our customers are our asset and precious to us more than their money.
HPE7-A02 Dumps
We have recently updated HP HPE7-A02 dumps study guide. You can use our ACNSP braindumps and pass your exam in just 24 hours. Our Aruba Certified Network Security Professional Exam real exam contains latest questions. We are providing HP HPE7-A02 dumps with updates for 3 months. You can purchase in advance and start studying. Whenever HP update Aruba Certified Network Security Professional Exam exam, we also update our file with new questions. Passin1day is here to provide real HPE7-A02 exam questions to people who find it difficult to pass exam
ACNSP can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with HPE7-A02 dumps. HP Certifications demonstrate your competence and make your discerning employers recognize that Aruba Certified Network Security Professional Exam certified employees are more valuable to their organizations and customers. We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive HP exam dumps will enable you to pass your certification ACNSP exam in just a single try. Passin1day is offering HPE7-A02 braindumps which are accurate and of high-quality verified by the IT professionals. Candidates can instantly download ACNSP dumps and access them at any device after purchase. Online Aruba Certified Network Security Professional Exam practice tests are planned and designed to prepare you completely for the real HP exam condition. Free HPE7-A02 dumps demos can be available on customer’s demand to check before placing an order.
What Our Customers Say
Jeff Brown
Thanks you so much passin1day.com team for all the help that you have provided me in my HP exam. I will use your dumps for next certification as well.
Mareena Frederick
You guys are awesome. Even 1 day is too much. I prepared my exam in just 3 hours with your HPE7-A02 exam dumps and passed it in first attempt :)
Ralph Donald
I am the fully satisfied customer of passin1day.com. I have passed my exam using your Aruba Certified Network Security Professional Exam braindumps in first attempt. You guys are the secret behind my success ;)
Lilly Solomon
I was so depressed when I get failed in my Cisco exam but thanks GOD you guys exist and helped me in passing my exams. I am nothing without you.