Question # 1 A consultant is setting up a new vSphere cluster. Customer requirements are as follows:
* VMs should automatically failover to another host if the host crashes
* Host CPU and Memory resources should be evenly balanced
* New VMs should be placed on the host with the most resources available
Which two settings should be turned on to meet the requirements? (Choose two.) A. vShpere DRSB. vSphere HAC. vSphere vMotionD. vSphere Power Management
Click for Answer
A. vShpere DRSB. vSphere HA
Question # 2 An administrator needs to initiate a new VDI project within a couple of months. Prism Central reports there are no storage resources to accommodate such workloads.
The administrator sees many powered-off VMs and has the authority to delete test VMs powered off at least for 30 days. Test VMs belong to the Test category.
Using Prism Central, which steps are required to identify the correct VMs to be deleted? A. Use Capacity Runway to filter by Test and Powered-off VMsB.
Filter VMs list, choose Test category and Inactive under EfficiencyC. Create a new Scenario selecting Test VMs. filter by uptimeD. Create a new Project selecting Test VMs, sorting by power state
Click for Answer
B.
Filter VMs list, choose Test category and Inactive under Efficiency
Question # 3 An administrator is implementing a VDI solution. The workload will be a series of persistent desktops in a dedicated storage container within a four-node cluster. Storage optimizations should be set on the dedicated storage container to give optimal performance including during a node failure event.
Which storage optimizations should the administrator set to meet the requirements? A. Compression, Deduplication, and Erasure CodingB. Deduplication and Erasure CodingC. Compression and DeduplicationD. Compression only
Click for Answer
B. Deduplication and Erasure Coding
Question # 4 A customer has an ESXi cluster with two 10GbE NICs on each node and the following requirements.
◦Solution must follow Nutanix Best Practices
◦Network configuration should be redundant
◦A vSphere Distributed Switch will be utilized
Which load balancing configuration should be used? A. Route based on IP hashB. Route based on source MAC hashC. Route based on originating port IDD. Route based on physical NIC load
Click for Answer
A. Route based on IP hash
Answer Description Explanation:
For a customer using an ESXi cluster with two 10GbE NICs on each node and a vSphere Distributed Switch, the recommended load balancing configuration, following Nutanix Best Practices for redundancy and efficiency, is "Route based on IP hash." This setting allows for optimal utilization of network bandwidth and redundancy by distributing the traffic based on the IP address pairings, ensuring a balanced load across the physical NICs.References: Nutanix Bible, Nutanix University NCS-Core 6.8 learning materials
Question # 5 During which part of the Knowledge Transfer does the customer learn about Nutanix basics and their environment at a high level? A. Technical ChecklistB. Technical Handoff SlidesC. Support portalD. As-Built Guide
Click for Answer
B. Technical Handoff Slides
Question # 6 A consultant notes that a customer environment requires Nutanix storage containers to be mounted on non-Nutanix hosts for manual data migration workflows. What configuration should the consultant validate to ensure setup was performed properly?
A. Prism Element • Settings - Filesystem Whitelist B. Prism Element - Settings - Cluster Details C. Prism Central - Settings - Cluster Details D. Prism Central - Settings - Filesystem Whitelist
Click for Answer
A. Prism Element • Settings - Filesystem Whitelist
Answer Description Explanation:
For ensuring that Nutanix storage containers can be mounted on non-Nutanix hosts for data migration workflows, the consultant should validate the configuration under: A. Prism Element - Settings - Filesystem Whitelist. This setting allows specific non-Nutanix hosts to access the Nutanix storage containers, which is essential for environments where data must be accessible to systems outside the Nutanix cluster. By whitelisting the IP addresses or hostnames of these external systems, they are granted the necessary permissions to mount and interact with the Nutanix file systems.References: Nutanix Prism Element User Guide, Nutanix Storage and Filesystem Configuration Best Practices.
Question # 7 An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present. A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project. Which step should the administrator use to initiate the project?
A. Enable Nutanix Flow at the Prism Central Level B. Manually disable CVM network Segmentation C. Convert storage only nodes into vSphere nodes D. Enable Jumbo Frames to accommodate network frames
Click for Answer
B. Manually disable CVM network Segmentation
Answer Description Explanation:
In preparing for the VMware NSX security project, the administrator should consider the network infrastructure and how the NSX will interact with the existing Nutanix environment. VMware NSX requires the use of VMware Distributed Virtual Switches. In the given scenario, where the CVM (Controller Virtual Machine) network is segmented and storage-only nodes are not present, the key step is to ensure that the network settings are compatible with NSX. Disabling the CVM network segmentation allows for a unified network that supports the requirements of NSX for network virtualization and security, making it the crucial first step before any further NSX-specific configurations are applied.References: Nutanix Bible, Nutanix Community discussions, VMware NSX documentation.
Question # 8 A customer is considering increasing the Redundancy Factor from 2 to 3 for a Nutanix cluster in their existing environment.
Which option would provide the company with the optimal solution? A. Four Compute Nodes with 25% available disk spaceB. Six Compute Nodes with 25% available disk spaceC. Three Compute Nodes with 40% available disk spaceD. Five Compute Nodes with 40% available disk space
Click for Answer
B. Six Compute Nodes with 25% available disk space
Answer Description Explanation:
To increase the Redundancy Factor (RF) from 2 to 3, at least five nodes are required for the cluster to function correctly with RF3, as each data block needs to be replicated to three different nodes. However, the optimal solution that offers both the necessary node count and sufficient storage overhead is:
Six Compute Nodes with 25% available disk space: This configuration ensures that there are enough nodes to support RF3 while maintaining adequate storage capacity for redundancy without overutilization.
Up-to-Date
We always provide up-to-date NCS-Core exam dumps to our clients. Keep checking website for updates and download.
Excellence
Quality and excellence of our Nutanix Certified Services Core Infrastructure Professional Exam practice questions are above customers expectations. Contact live chat to know more.
Success
Your SUCCESS is assured with the NCS-Core exam questions of passin1day.com. Just Buy, Prepare and PASS!
Quality
All our braindumps are verified with their correct answers. Download NCS Professional Practice tests in a printable PDF format.
Basic
$80
Any 3 Exams of Your Choice
3 Exams PDF + Online Test Engine
Buy Now
Premium
$100
Any 4 Exams of Your Choice
4 Exams PDF + Online Test Engine
Buy Now
Gold
$125
Any 5 Exams of Your Choice
5 Exams PDF + Online Test Engine
Buy Now
Passin1Day has a big success story in last 12 years with a long list of satisfied customers.
We are UK based company, selling NCS-Core practice test questions answers. We have a team of 34 people in Research, Writing, QA, Sales, Support and Marketing departments and helping people get success in their life.
We dont have a single unsatisfied Nutanix customer in this time. Our customers are our asset and precious to us more than their money.
NCS-Core Dumps
We have recently updated Nutanix NCS-Core dumps study guide. You can use our NCS Professional braindumps and pass your exam in just 24 hours. Our Nutanix Certified Services Core Infrastructure Professional Exam real exam contains latest questions. We are providing Nutanix NCS-Core dumps with updates for 3 months. You can purchase in advance and start studying. Whenever Nutanix update Nutanix Certified Services Core Infrastructure Professional Exam exam, we also update our file with new questions. Passin1day is here to provide real NCS-Core exam questions to people who find it difficult to pass exam
NCS Professional can advance your marketability and prove to be a key to differentiating you from those who have no certification and Passin1day is there to help you pass exam with NCS-Core dumps. Nutanix Certifications demonstrate your competence and make your discerning employers recognize that Nutanix Certified Services Core Infrastructure Professional Exam certified employees are more valuable to their organizations and customers. We have helped thousands of customers so far in achieving their goals. Our excellent comprehensive Nutanix exam dumps will enable you to pass your certification NCS Professional exam in just a single try. Passin1day is offering NCS-Core braindumps which are accurate and of high-quality verified by the IT professionals. Candidates can instantly download NCS Professional dumps and access them at any device after purchase. Online Nutanix Certified Services Core Infrastructure Professional Exam practice tests are planned and designed to prepare you completely for the real Nutanix exam condition. Free NCS-Core dumps demos can be available on customer’s demand to check before placing an order.
What Our Customers Say
Jeff Brown
Thanks you so much passin1day.com team for all the help that you have provided me in my Nutanix exam. I will use your dumps for next certification as well.
Mareena Frederick
You guys are awesome. Even 1 day is too much. I prepared my exam in just 3 hours with your NCS-Core exam dumps and passed it in first attempt :)
Ralph Donald
I am the fully satisfied customer of passin1day.com. I have passed my exam using your Nutanix Certified Services Core Infrastructure Professional Exam braindumps in first attempt. You guys are the secret behind my success ;)
Lilly Solomon
I was so depressed when I get failed in my Cisco exam but thanks GOD you guys exist and helped me in passing my exams. I am nothing without you.